NewerTech Voyager Q SATA Hard Drive Docking Station Reader

NewerTech Voyager Q SATA Hard Drive Docking Station Reader

  • Description
  • Rates
  • Other Information


Supports all all 2.5" and 3.5" SATA I/II/III drives and SSD drives up to 6.0TB

Multi-Interface for maximum data transfer rates and system compatibility

Data transfer rates up to 5.0Gb/s (500MB/s)

Push button drive eject for safe removal

Hot-Swap functionality for fast access of multiple SATA drives

Plug and Play with Macs and PCs

Transfer Rates:

USB 3.0: up to 5.0Gb/s (500MB/s)

eSATA: up to 3.0Gb/s (or 300MB/s)

FireWire 800: up to 800Mbps (100MB/s)

FireWire 400: up to 400Mbps (50MB/s)


¹ Supports up to 6.0TB

² Use of eSATA interface requires system reboot in order to recognize drive. For FireWire 800 users, OWC recommends that the Voyager be the only device connected or the last device in the chain when hot-swapping drives. If you have other devices behind the Voyager, not all devices will remount after a drive is swapped. When that occurs, a power-cycle is needed for that device. For eSATA users, a system reboot is required in order to recognize drive.

NewerTech Voyager SATA drive docking solutions support all 2.5" and 3.5" SATA 6Gb/s, 3Gb/s and 1.5Gb/s drives up to 6.0TB

Whether you are on a data recovery mission or just want to check the contents of an older swapped out drive, NewerTech Voyager is the easiest, most convenient way to access data from any Serial ATA (SATA) drive

Just insert any standard 2.5" or 3.5" SATA I/II/III drive with up to 6.0TB capacity into the compact docking base and select one of the four interfaces supported by your Mac or PC for the fastest data transfer performance

Check out the VMEDIA Memory Card Compatibility Database here

Voyager Q SATA Hard Drive Docking Station Reader hires can be placed in a compact 1120 Peli case for easy storage and/or transportation.


  • Rate:
    £8/day £24/week Add to Basket